Optimum B 24 H, Руководство по эксплуатации

Страница: 10 / 100

OPTIMUM
M A S C H I N E N - G E R M A N Y
Safety
Version 2.2.2 dated 2014-03-07 Page 10 Original operating instructions
B24H | B24HV | B28H | B28HV GB
If the drilling machine is used and maintained by the staff who are not duly qualified, there may
be a risk resulting from incorrect or unsuitable maintenance of the drilling machine.
INFORMATION
Everyone involved in the assembly, commissioning, operation and maintenance must

be duly qualified,

strictly follow these operating instructions.
In the event of improper use

there may be a risk to the staff,

there may be a risk to the machine and other material values,

the correct function of the drilling machine may be affected.
Always disconnect the drilling machine, and upright drill if cleaning or maintenance work is
beingcarried out.
WARNING!
The drilling machine may only be used with functional safety devices.
Disconnect the drilling machine immediately, whenever you detect a failure in the safety
devices or when they are not fitted!
All additional devices installed by the operator have to be equipped with the prescribed
safety devices.
This is your responsibility being the operating company!

"Safety devices“ on page 12
1.5 Qualification of personnel
1.5.1 Target group
This manual is addressed to

the operating companies,

the users,

the staff for maintenance works.
Therefore, the warning notes refer to both, operation and maintenance staff of the drilling
machine.
Determine clearly and explicitly who will be responsible for the different activities on the
machine (operation, maintenance and repair).
Unclear responsibilities constitute a safety risk!
Always disconnect plug of the drilling machine from the electrical power supply. This will pre-
vent it from being used by unauthorized staff.
The qualifications of the staff for the different tasks are mentioned below:
Operator
The operator is instructed by the operating company about the assigned tasks and possible
risks in case of improper behaviour. Any tasks which need to be performed beyond the opera-
tion in the standard mode must only be performed by the operator if it is indicated in these
instructions and if the operating company expressively commissioned the operator.
Electrical specialist
Due to his professional training, knowledge and experience as well as his knowledge of respec-
tive standards and regulations the electrical specialist is able to perform works on the electrical
system and to recognise and avoid any possible dangers himself.