Optimum 3338165, Руководство по эксплуатации

Страница: 42 / 86

Version 1.1.0 - 2020-08-07 42 Translation of original instruction
MH35G │ MH35V EN
M
H
35
G
_M
H
35
V
_
GB
_
5.
fm
5.2 Inspection and maintenance
The type and level of wear depends to a large extent on the individual usage and operating
conditions. Any indicated intervals therefore are only valid for the corresponding approved con-
ditions.
Interval Where? What? How?
Start of work,
after every main-
tenance or repair
work
M
ill
ing
machin
e  
Safety check on page 16
Start of work,
after every main-
tenance or repair
work
Do
vetail g
u
id
es
Oiling

Oil all guide rails.
Every week
Mi
lli
ng
tabl
e
Oiling

Oil all bare steel surfaces. Use acid-free oil.
Monthly
Cla
m
pi
ng
b
o
lt
s
Mi
lli
ng
h
e
ad
firmly tight-
ened

Ensure that the clamping bolts for swivelling the drill head
are firmly tightened.
Monthly
Oil
er cu
p
Oiling

Lubricate all oiler cups with machine oil, do not use grease
guns or the like.