Optimum 3338165, Руководство по эксплуатации

Страница: 28 / 86

Version 1.1.0 - 2020-08-07 28 Translation of original instruction
MH35G │ MH35V EN
M
H
35
G
_M
H
35
V
_
GB
_
3.
fm
3.7.1 Gear
3.8 Cleaning and lubrication

Remove the anti-corrosive agents which has been applied to the milling machine for trans-
port and storage. We recommend you use paraffin for this purpose.

To clean the milling machine, do not use any solvents, nitro-cellulose thinner or other clean-
ing agents that could damage the paintwork. Observe the cleaning agent manufacturer's
information and notes.

Grease all exposed machine parts using an acid-free lubricating oil.

Lubricate the milling machine in accordance with the lubrication schedule.

Inspection and maintenance on page 42

Check that all spindles are running smoothly. All spindle nuts are re-adjustable.

Check the oil level of the spindle gearbox.
INFORMATION

Lubricant on page 75
The milling machine has been painted with varnish . This fact must be taken into account when
selecting your cooling lubricant.
Fill cap
Sight glass
Oil outlet