Optimum 3034250, Руководство по эксплуатации

Страница: 64 / 130

Safety
Version 1.0.4 - 2022-02-15 64 Translation of original instruction
DH35G EN
DH
35
G_
G
B
_
1.f
m

a drilling table with T-slots to fix the workpiece or a vice,

a drill chuck guard, in order to prevent interference with the rotating tool.
INFORMATION
The geared drill can only be switched on if the drill chuck guard is closed.
WARNING!
Although the isolating safety devices provided and delivered with the machine are
designed to reduce the risks of workpieces being ejected or parts of tools or workpieces
breaking off, they cannot eliminate these risks completely. Always work carefully and
observe the limits of the machining process.
1.10 Safety check
Check the geared drill before each start-up or at least once per shift. Inform the person respon-
sible immediately of any damage, defects or changes in the operating function.
Check all safety devices

at the beginning of each shift (with the machine stopped),

once a week (with the machine in operation) and

after all maintenance and repair work.
Check that prohibition, warning and information signs and the labels on the geared drill

are legible (clean them, if necessary)

are complete (replace if necessary).
INFORMATION
Organise the checks according to the following table;
General check
Equipment Check OK
Guards Mounted, firmly bolted and not damaged
Signs,
Markers Installed and legible
Date: Checked by (signature):
Functional check
Equipment Check OK
EMERGENCY STOP
push button After actuating the emergency stop push button the geared
drill must be switched off.
Drill chuck guard The geared drill can only be switched on if the drill chuck
guard is closed. The engine must switch off when the drill
chuck guard is opened during operation.
Date: Checked by (signature):