manualshive.com logo in svg

Optimum 3008201, Руководство по эксплуатации, Страница: 9 / 62

Поделиться
Скачать
Optimum 3008201 Скачать руководство пользователя страница 9

Version 1.0.1 - 2020-07-23

9

Translation of original instruction

B20 | B25 | B32

EN

B20-

B25-

B32_

GB.

fm

If the drilling machine is used and maintained by personnel who are not duly qualified, there
may be a risk resulting from incorrect or unsuitable maintenance of the geared drill.

INFORMATION

Everyone involved in the assembly, commissioning, operation and maintenance must

be duly qualified

and strictly follow these operating instructions.

In the event of improper use

there may be a risk to personnel,

there may be a risk to the machine and other material values,

the correct function of the drilling machine may be affected.

Always disconnect the drilling machine if cleaning or maintenance work is being carried out, or
is no longer in use.

WARNING!

The drilling machine may only be operated with functional safety devices. 

Disconnect the drilling machine immediately, whenever you detect a failure in the safety
devices or when they are not fitted!

All additional devices installed by the operator must be equipped with the stipulated
safety devices. This is your responsibility being the operating company!



 Safety devices on page 11

1.6

Qualification

It is indispensable that the operator is suitably qualified for safe use and secure setting and
operation of the machine.

1.6.1

Private Users

The drilling machine is also used in the private domain. The acumen of people in the private
sector with training in metal working was taken into consideration for creating this operation
manual. Vocational training or further instruction in a metal working profession is a prerequisite
for safe operation of the machine. It is essential that the private user is aware of the dangers
involved in operating this machine.  

1.6.2

Obligations of the User

The user must

have read and understood the operating manual,

be familiar with all safety devices and regulations,

be able to operate the drilling machine.

1.6.3

Craftsman or industrial use

This manual is addressed to

the operating companies,

the operators,

the maintenance personnel.

Therefore, the warning notes refer to both, operation and maintenance personnel of the drilling
machine.

Содержание 3008201































































Отзывы:

Нет отзывов