manualshive.com logo in svg

Optimum 3008201, Руководство по эксплуатации, Страница: 12 / 62

Поделиться
Скачать
Optimum 3008201 Скачать руководство пользователя страница 12

Version 1.0.1 - 2020-07-23

12

Translation of original instruction

B20 | B25 | B32

EN

B20-

B25-

B32_

GB.

fm

once a week (with the machine in operation) and

after all maintenance and repair work.

Check that prohibition, warning and information signs and the labels on the drilling machine

are legible (clean them, if necessary)

are complete (replace if necessary).

INFORMATION

Organise the checks according to the following table;

General check

Equipment

check

OK

Guards

Mounted, firmly bolted and not damaged

Signs,
Markers

Installed and legible

Date:

 Checked by (signature):

Functional check

Equipment

check

OK

Emergency-stop switch

After the emergency stop button is pressed, the drilling 
machine must switch off.

Drill chuck guard

The drilling machine may only switch on, if the drill chuck 
guard is closed. The engine must switch off when the drill 
chuck guard is opened during operation.

Protective cover of V-
belt.

The drilling machine may only switch on, if the protective 
cover of V-belt is closed. The integrated switch must shut off 
the motor when opening during operation.

Date:

 Checked by (signature):

Содержание 3008201































































Отзывы:

Нет отзывов