manualshive.com logo in svg

Optimum 3008201, Руководство по эксплуатации, Страница: 23 / 62

Поделиться
Скачать
Optimum 3008201 Скачать руководство пользователя страница 23

Version 1.0.1 - 2020-07-23

23

Translation of original instruction

B20 | B25 | B32

EN

B20-

B25-

B32_

GB.

fm

Place the drilling table at the drilling table support. Mount the clamping lever.

Img.3-5:   Assembly clamping lever

Fitting the drill head

Put the drilling head on the drill column and turn it as much until is aligned with the stand.

Make sure that the drilling head is completely fixed in the drill column. 

Lock the drill head with the two threaded pins.

Mount the three levers of the spindle sleeve feed.

Img.3-6:   Assembly drill head

Assembly of the drill chuck protection

WARNING!

Never operate drilling machines without drill chuck protection.

Shift the aluminium profile including the mounted safety screen (plastic screen) into the fix-
ture which is mounted on the drilling head.

After assembly of the aluminium profile screw down the adjusting screw.

Screw the hexagon socket screw with the locking washer into the aluminium profile.

Clamping lever

Lever

Threaded pins

Содержание 3008201































































Отзывы:

Нет отзывов