Safety
Version 1.0 2019-01-17
Page 43
Translation of the original instructions
B17Pro basic
GB
B17P
ro_b
asic_
G
B.
fm
OPTIMUM
M A S C H I N E N - G E R M A N Y
®
1.12.3 Prohibition, warning and mandatory signs
INFORMATION
All warning signs must be legible. They must be checked regularly.
1.13
Personal protective equipment
For some works you need personnel protective equipment as protective equipment. These are
Safety helmet,
protective glasses or face guard,
protective gloves,
safety shoes with steel toe caps,
ear protection.
Before starting work make sure that the required personnel protective equipment is available at
the work place.
CAUTION!
Soiled personal protection equipment that may be contaminated may cause illness. It
must be cleaned after each use and at least once a week.
Personal protective equipment for special works
Protect your face and your eyes: Wear safety glasses for all work where your eyes are at risk.
Wear protective gloves when handling pieces with sharp edges.
Wear safety shoes when you assemble, disassemble or transport heavy components.
1.14
Safety during operation
We specifically point out the dangers in the description of work with and on the bench drill.
WARNING!
Before activating the bench drill, double-check that make sure that there are no dangers
generated for persons, not cause damage to equipment.
Avoid any unsafe work methods.
Make sure that your work does not endanger anyone.
The instructions described in these operating instructions must be strictly observed during
assembly, operation, maintenance and repair.
Do not work on the bench drill if your concentration is reduced, for example, because you
are taking medication.
Inform the supervisor about all hazards or faults.
Stay on the bench drill until the machine completely stopped moving.
Use the specified personal protective equipment. Ensure you wear close-fitting clothing
and, if necessary, a hairnet.
Do not use protective gloves when drilling.
1.15
Safety during maintenance
Inform the operators in good time of any maintenance and repair works.
Report all safety relevant changes and performance details of the bench drill or their opera-
tional behaviour. Any changes must be documented, the operating instructions updated and
machine operators instructed accordingly.
