Instructions for Use and maintenance OPTIMAL SP50 (0810)
1 General
Information
Thank you for choosing our Optimal sand-spreader. We have worked hard to manufacture
a strong and reliable sand-spreader that will last for many years. As the machine’s service
life does not depend solely on us but also on you we have prepared the guidelines that
describe the proper use and maintenance of the machine. Please read the whole manual
carefully before operating the machine. If you want to order spare parts or need service,
please contact the company where you bought the machine. When submitting the order for
the spare parts, specify the model, type and serial number from the name plate on the
chassis of the machine.
1.1 Description
The OPTIMAL sand-spreader is a simple and easy-to-operate machine for spreading sand
(0-4 mm), chip stone (2-8 mm) and salt. It is recommended that the spreading material is
sifted into correct fractions.
Spreading material with larger size than described can damage
the machine. A to fine grained sand that hold water must be avoided, when it builds up
vaults which prevent material to flow down for spreading.
The sand-spreader is hand pushed and mechanical driven by one of the wheels. Material
is spread by a rotating steel roller at the bottom of the bucket. The roller is rotating as long
as the sand-spreader is pushed forward.
The flow of material spread can be adjusted with a rubber flap that is pressed against the
spreading roller. Rubber flap is manuvered by a handle on left side of the machine.
1.2 Technical
specification
Model SP50
Spreading width, cm
56
Capacity, liters
50
Weight, kg
30
Cover plates
No
Due to continuous product development, any data is subject to change without prior notice.
TREJON AB
- 5 -
trejonindustries.se
