1
SAFETY PRECAUTIONS
• To avoid damaging the battery do not keep charger plugged in once
battery is fully charged
• Avoid installing the balance in direct sunlight. This may cause poor
performance or malfunctions.
• Do not mix batteries, replace all 4 batteries at the same time
• If the balanced will not be used for a long period of time, remove all batteries
from the battery compartment to avoid leakage, which may cause damage to
the instrument
• Avoid overloading or dropping material onto the platform as that may damage
the balance
• Place the weight on the center of the pan for accurate weighing
• Make sure the weight is not over the Max capacity as it could damage the load
cell inside.
• Do not spill liquids on the balance as it is not water-resistant. Liquids may
damage the case and any liquid inside may cause damage to the electronics
• Material that has a static electric charge could influence the weighing. Dis-
charge the static electricity of the samples, if possible. Another
solution to the problem is to wipe both sides of the pan and the top of the
case with an anti-static agent
• Strong magnetic fields and static electricity will have an adverse effect on the
weighing sensor, when the disturbances disappear the machine will function
properly again
• Do not modify this machine without authorizing with manufacture
• Do not open the machine housing. Machine will lose its guarantee
service is security label is broken
