Keratron
®
Scout Installation and Operating Manual
OPTIKON 2000
SYMPTOMS
CORRECTIVE
ACTION
e. Import tests from the folder “C:\My
Documents\Database_old”.
Solution B (if you are working in a LAN group)
a. Exit (all) from the Scout program
b. Open the file indtest.mdb (from the folder reported
at the top of the Scout desktop).
c. Open the ‘tabLock’ table .
d. Modify the first record of the table from the present
value to ‘Unknown’.
e. Save and exit
CAUTION!
The Scout database is saved with DAO 3.5
(Access ‘97). If you are using an Access
version more updated, do not modify
(saving) the database with the new version,
because the modified file would not be
readable from the Scout.
If it was due to a wrong manouvre by a non
expert user, reload the database and save it
again with the DAO 3.5 version (“prior
Access database version”)
No test is visible in the “database
explorer”
a. An empty database has been selected.
b. Check whether the ‘Group’ selection has been
pressed and no “Group” is present in the database.
c. Check whether the ‘Operator’ selection has been
pressed and no “Operator” is present in the
database.
Note: The selections “Group” and “Operator” are of “toggle”
type, and are independent from alphabetical or
chronological selection
Default settings do not correspond to the
last ones, or the database looks
“disappeared”
a. Exit the Scout program
b. Cancel o change the name (for more security) to
the file “C:\Keratron\Scout.ini”.
c. Restart the Scout program and set the preferred
options again.
Cod. 161204EN
9-5
2008-12-03 Rev.B