Keratron
®
Scout Installation and Operating Manual
OPTIKON 2000
7.5 PUPILLOMETRY
In this chapter are described only basic information on how pupillometry images shall
be acquired with a Scout videokeratoscope with pupillometry lamp board
(161203/161204).
You will find detailed information of: pupillometry functions, how pupillometry is
represented on Keratron
®
Scout maps and considerations about pupillometry, in the
on-line-Help
of “Scout software”, release 3.6 or later.
IR-Pupillometry picture
To acquire an IR-Pupillometry image, start image acquisition as usual, by pressing
OD or OS on the VK display panel, then press once the inverted [P] button above the
display (figure 9). You will see a white square at the bottom right of VK display (A)
and the cone will darken.
Fig.9 – Toggle among pupillometry modes
Fig.10 – Accommodate both eyes to dark
Cod. 161204EN
7-7
2008-12-03 Rev.B