Keratron
®
Scout Installation and Operating Manual
OPTIKON 2000
6.4.3 KERATRON SCOUT SOFTWARE INSTALLATION
Both if you are installing the Keratron Scout software from the Web and if you are
installing from CD, remove any previous Scout versions from your PC before install
the new Scout software.
If you are installing the software from the CD-ROM :
•
Insert the CD-ROM into the reader.
•
Wait a few seconds, an HTML page will be loaded.
•
Choose the “English” hyperlink.
•
Choose the “Install Scout Rel xx.xx, for Keratron Scout & Keratron Bridge“
hyperlink.
•
Choose “Run” when prompted.
If you are going to install the downloaded version:
•
Using “Windows Explorer” select the folder where the downloaded files are.
•
Run the “Setup.exe” by double-clicking on it.
Indipendently if the installation has been made from CD or downloaded version, the
setup procedure could notify some messages, like DLLs version conflicts etc.
See the troubleshooting section in this manual (see 9.1.1) for the proper action.
6.4.4 IMPORTING OLD KERATRON
®
TESTS
The exams file format of Keratron
®
Scout is different from the old Keratron one
®
. Old
exams to be used in Scout software have to been “translated”. This operation can be
done with the import function:
•
From menu bar choose “File” -> “Import tests…”.
•
Select the folder that contains the tests and click the OK button.
•
The “Test Manager” window will appears.
•
Click on the “Import” icon.
Before importing it’s advisable to have these remarks:
Cod. 161204EN
6-9
2008-12-03 Rev.B