OPTIKON BIOLINE, Инструкция по установке и эксплуатации, Страница: 22 / 42

BIOLINE Manual for installation and use
OPTIKON 2000
3) A-SCAN KEY
Displays the measurement acquisition page with the relating A-SCAN graphic. In the
course of acquisition this same key alternately starts and ends the acquisition.
4) IOL KEY
Displays the page for calculating the intraocular lens, with results which also relate to
correction with spectacles or contact lenses. On the calculation page it selects the 2
principal lenses alternately.
5) D-BASE KEY
Not active in this version. Prepares any interface with an external computer for
patient archiving.
6) SET KEY
Displays the page for setting up the instrument. On this page all the settings for the
lens constants and the biometric examination can be cancelled, and the language for
printing the user guide can be selected.
7) PRINT KEY
Sends the printer the results of the biometry and the IOL calculation.
8) ON LED
This indicator signals the presence of supply voltage when the rear switch is in the
ON position.
9) POINT/ ENTER Key
Press this key to confirm and close the selection of parameters indicated on the
screen.
10) PROBE SOCKET
Input for the biometry probe connector.
11) ARROW KEYS
These are general use keys for changing and entering data. In general, the vertical
arrows are used to select a parameter from those displayed on the screen; the
horizontal arrows, on the other hand, are generally used to change the value of the
parameter selected.
Code 141002EN 7-2 26.10.05 Rev.0