Page 13
8.3.2 OS-C3
The coarse knob tension is preset in the factory.
1.
To modify the tension according to personal’s needs, rotate
the ring
①
using a flat screwdriver. (Fig. 13)
•
Clockwise rotation increases the tension.
•
If the tension is too loose, the stage could go lower by itself or
the focus easily lost after fine adjustment. In this case, rotate
the knob in order to increase the tension.
F
Fig. 13
ig. 13
F
Fig. 14
ig. 14
F
Fig. 15
ig. 15
F
Fig. 16
ig. 16
①
②
③
④
8.4 Stage
8.4.1 OS-A1
Put the slide on the stage and hold it using the stage clips
②
.
(Fig. 14)
8.4.2 All other models
Stage accepts standard slides 26 x 76 mm, thickness 1,2 mm
with coverslide 0,17 mm. (Fig. 15)
1.
Open the spring arm of the slide holder
③
and place the slide
from the front on the stage.
2.
Gently release the spring arm of the slide holder.
• A sudden release of the spring arm could cause the fall-
ing of the slide.
8.5 Adjust the interpupillary distance
8.5.1 OS-A3
Rotate toward left or right the interpupillary distance knob
④
until
one circle of light can be seen. (Fig. 16)
The range of the interpupillary distance is 55- 75 mm.
Содержание OPTISTAR OS-A1 Series
