Optika OPTISTAR OS-A1 Series, Инструкция по эксплуатации

Страница: 10 / 126

Page 10
7. Assembling
7.1 All models
1. Remove the dust protection cap from the eyepiece sleeve
and insert the eyepiece into the empty eyepiece sleeve. (Fig.
1)
F Fig. 1 ig. 1
F Fig. 2 ig. 2
F Fig. 3 ig. 3
7.1.1 OS-A / OS-C Series
Insert the power supply jack in the socket
①
placed at the rear
side of the microscope. (Fig. 2)
7.1.2 OS-B Series
Insert the power cord in the socket placed at the rear side of the
microscope.
7.2 OS-B3
1. Remove the dust protection cap of the photo tube.
2. Insert the “Eyepiece Linker”
②
. (Fig. 3)
3. Insert the projection lens in the empty hole of the Eyepiece
Linker.
• The camera will not be in focus if the Eyepiece Linker is
not used.
①
②
F Fig. 4 ig. 4
7.3 OS-C3
1. Unscrew the locking screw
③
on the right side of the photo
port and remove the dust protection cap. (Fig. 4)
2. Insert the photo tube
④
in the empty hole and lock the screw.
3. Insert the projection lens in the empty hole of the photo tube.
③
④