Optika Italy INSPECTION SYSTEMS Series, Инструкция по эксплуатации

Страница: 19 / 192

Page 19
Cross Hide
1. Click Crosshair tool .
2. Select “
Hide
”. All cross lines or the crosshair with notches will be hidden in the image area.
Line color
1. Click on the set crosshair color tool .
2. Pull down to set the crosshair color. After the color is set, draw the crosshair again to take effect.
• Note: the color of the previously drawn crosshair does not change.
10.1.2 Image capture
a) USB flash drive insertion
First confirm whether the USB flash drive is successfully inserted.
1. Insert the USB flash drive into the USB slot on the back side of the microscope body.
2. After inserting the USB flash drive, the icon of the successful insertion of the USB flash drive is displayed for a few
seconds in the upper right corner of the display.
3. Now it is possible to take an image.
b) Image capture operation
1. Click the “
Capture
” icon.
2. The icon will be displayed in the center of the screen. After about 3 seconds, the icon disappears and the picture is
automatically saved in the
/mnt/sdcard/img
folder of the USB flash drive.
• Note: the USB flash drive must be formatted in FAT 32 mode. Any other formatting mode will not allow images
to be saved correctly.
c) Prefix
When the “
Naming
” is “
Auto
”, the prefix of the file name can be added, and the file is named and saved with “ serial
number”.
d) Image Format
Click on the image format drop-down list to select the image format. There are two formats to choose from: .jpg or .bmp.