Optika Italy B-510 Series, Инструкция по эксплуатации

Страница: 22 / 162

Page 22
11. Microphotography
11.1 Use of C-mount cameras
1. Loosen the clamping screw
①
on the trinocular port and
remove the dust cap
②
. (Fig. 35)
①
②
①
②
F Fig. 35 ig. 35
F Fig. 36 ig. 36
F Fig. 37 ig. 37
④
①
②
③
④
③
2. Screw the C-mount adapter ③ to the camera
④
and insert
the round dovetail of the C-mount into the empty hole of the
trinocular port, then tighten the clamping screw
①
. (Fig. 36)
11.2 Use of reflex cameras
1. Insert the Reflex adapter
①
into the relay tube to the micro -
scope
②
.
2. Screw the “T2” ring ③ (not provided) to the reflex adapter.
3. Connect the Reflex camera
④
to the “T2” ring just installed
(Fig. 37).
4. Mount the other end of the relay tube
②
into the empty hole
of the trinocular port, then tighten the clamping screw. (Fig.
35)
• “T2” ring is not provided along with the microscope, but is
commercially available.
• While shooting dark specimens, darken eyepieces and view -
finder with a dark cloth to minimize the diffused light.
• To calculate the magnification of the camera: objective magni -
fication * camera magnification * lens magnification.
• If using an SLR camera, mirror movement may cause the
camera to vibrate.
• We suggest lifting the mirror, using long exposure times
and a remote cord.