Optics11 DELTASENS, Руководство пользователя

Страница: 10 / 38

10
optics11.com
1.2. Starting the software
1.2.1. Setting the unit IP address
The device connects with the computer using the Ethernet protocol. It can be connected through
LAN or directly to the operating PC. In both cases the IP address of the device must be looked up
and set in the software to allow remote control of the unit. While booting, the software will look for
the interrogator unit at the latest
IP address set by the user. If no unit is found at that address, the “IP
Discovery” tool will appe ar to help the user identifying the unit IP address (see Figure 3).
Figure 3: IP Discovery tool
•
Configured IP – last IP address set by the user.
•
Available NICs IP – interface controllers IPs available in the network.
•
IP to scan – allows to specify the range of IP addresses to scan to search for the unit.
•
Port – port used to try to ping with the unit, should be set to 10002 as default.
•
Timeout – how long the software will wait for a response when pinging an IP address.
•
Box IP – IP address at which the DeltaSens was found by the “Discovery Tool” .