Switch operation guide
User can switch and control Two (2) PCs as 2:1 KVM switch function at specific
position such as local and remote side by operating the switch on the front panel of
KVMX-100-TR.
Graphic data is always transmitted to not only local DVI-1 OUT and DV I- 2
OUT but also remote DVI-1 OUT and DV I- 2 OUT. However, USB port for
keyboard and mouse is selectable for control at specific position.
Local control
- Set the switch on the front of the Transmitter to the Local side, and the
Local status LED (blue) of both will be turned on.
- Then, you can switch and control by setting the PC-1 and PC-2 switch on
the front of Transmitter at Local side. If you set the switch from the PC-1 to
the PC-2, the status LED (blue) of the PC-2 will be turned on, and you can
control the PC-2 through the display, connected to
DVI-2 OUT
of the
Transmitter.
On the contrary, if setting the switch from the PC-2 to the PC-1, the status
LED (blue) of the PC-1 will be turned on, and you can control the PC-1
through the display, connected to
DVI-1 OUT.
Remote control
- Set the switch on the front of the Transmitter from the Local side to the
Remote side, and the Remote status LED (blue) on the front side of both
Transmitter and Receiver will be turned on.
- Then, you can switch and control by setting the PC-1 and PC-2 switch on
the front of Receiver at Remote side
.
The next step is the same as Local
control.
Note:
If you need switching function with a PC (dual DVI ports), please set
and choose the multi-display mode that you want. In this case, you can switch
and control two (2) sources from a PC without any setting the switches.
1-6 Switch operation guide
Switch operation guide
Console switch control
- Connect the Console port in both Transmitter and Receiver to the Console
port in both KVMX-100-LO and KVMX-100-RO over each one (1) console
cable.
- Set the switch on the front
side of both Transmitter and Receiver to the
Console side.
- Then, you can switch and control by just pushing the PC-1 and PC-2 button
on the KVMX-100-LO or KVMX-100-RO by setting the switch (Local or
Remote) on the KVMX-100-LO. If you set the switch to the Local, the Local
status LED (blue) of both sides will be turned on, and you can control both
PC-1 and PC-2 by just pushing the PC-1 and PC-2 button at Local side.
On the contrary, if you set the switch from the Local to the Remote, the
Remote status LED (blue) will be turned on, and you can control both PC-1
and PC-2 by just pushing the PC-1 and PC-2 button at Remote side.
Note:
It is very useful to switch and control when KVMX-100-TR and displays
are located far.
1-7 Switch operation guide
