Opticon 25-WEDGE-06, Руководство пользователя

Страница: 8 / 49

Page 4
Programming the Scanner
This manual provides an easy way of changing
certain parameters. A parameter is changed by
reading a specific bar code associated to a specific
function.
To select menu options:
1. Scan “ Start/End Program Menu .” The
scanner will beep continuously to indicate that
it is ready to be programmed.
2. Make parameter selection from menu (a beep
and a green light indicates that the parameter
has been scanned).
3. Scan “ Start/End Program Menu .” This
completes the operation and the new
parameter is saved in memory.
The CCD reader is normally programmed as a
keyboard wedge for IBM’s XT, AT, or PS/2 Models
50, 60, 70 and 80. If the host computer is not one
of these models, refer to “Computer Type
Selection” on page 18 to make another selection.
NOTE : (
B
) A pointing finger indicates scanner
default settings.