Page 7
Troubleshooting
A. If LEDs do not light up when installation
instructions are followed:
•
Make sure there is power to the system.
•
Recycle computer power.
•
Verify computer fuses are ok.
•
Check for loose cable connections.
•
Are adaptors being used?
B. If LEDs light up, but good read beep is
not heard and no data appears on the
computer:
•
Make sure the distance between the scanner
and bar code label is not greater than the
specified depth-of-field when trying to read it.
•
Verify the bar code label is readable and meets
bar code specification.
•
Check to see if the scanner reads other bar
code labels (if yes, the non-reading label may
be a label which the scanner is not
programmed to decode.)
•
Verify that the bar code label is not wider than
the CCD scan window.
CONTINUED ON NEXT PAGE...
