OPTICOM SVD-2404A, Руководство пользователя

Страница: 88 / 137

Alarm Management DVR User Manual
80
the duration time is set to 10 seconds, once the system detects a motion, it will go to alarm and
would not detect any other motion (specific to camera) in 10 seconds. If there is another motion
detected during this period, it will be considered as a continuous movement; otherwise it will be
considered as a single motion.
③
Drag the camera image to set the motion area. You can set more than one motion area. Click
“All” to set the whole camera image as the motion area. Click “Reverse” to swap the motion area
and the non-motion area. Click “Clear” to clear all the motion areas.
④
Click “Apply” to save the settings. Click “Processing Mode” to go to the alarm handling
configuration interface of the motion alarm.
9.2.2 Motion Alarm Handling Configuration
①
Click Start
→
Settings
→
Alarm
→
Motion Alarm to go to the following interface.
②
Enable or disable “Record”, “Snapshot”, “Push”, “Alarm-out”, “Preset”, “Buzzer”, “Pop-up
Video” and “E-mail”. The alarm handling setting of motion alarm is similar to that of the sensor
alarm (see 9.1 Sensor Alarm for details).
③
Click “Apply” to save the settings. You can click “Motion Settings” to go to the motion
configuration interface.
9.3 Intelligence Alarm
9.3.1 Object Detection
Object Detection Configuration :
① Click Start
→
Settings
→
Camera
→
Intelligent Analytics
→
Object Detection to go to the
following interface.