OPTICOM SVD-2404A, Руководство пользователя

Страница: 67 / 137

Record & Disk Management DVR User Manual
59
7.4 Record Mode
7.4.1 Manual Recording
Method One : Click on the tool bar at the bottom of the live view interface to enable recording
of the camera.
Method Two : Go to live view interface and then click the right-click menu “Manually Record
On” in the camera window or click on the tool bar under the camera window to start recording.
Note: Click Start
→
Settings
→
Record
→
Mode Settings and then set the manual record time in the interface.
Click “Apply” to save the settings.
7.4.2 Timing Recording
Timing Recording : the system will record automatically according to the schedule. Set
the timing record schedule of each camera. See 7.3 Schedule Setting for details.
7.4.3 Motion Based Recording
Motion Based Recording : the system will start motion based recording when the motion object
appears in the setup schedule. The setup steps are as follows:
① Set the motion based recording schedule of each camera. See 7.3 Schedule Setting for
details.
②
Enable the motion and set the motion area of each camera. See 9.2.1 Motion
Configuration for details.
The camera will start motion based recording once you finish the above settings.
7.4.4 Sensor Based Recording
①
Set the sensor based recording schedule of each camera. See 7.3 Schedule Setting for details.
②
Set the NO/NC type of the sensor, enable the sensor alarm and then check and configure the
“Record”. See 9.1 Sensor Alarm for details.
7.4.5 Intelligence Recording
①
Set the intelligence recording schedule of each IP camera. See 7.3 Schedule Setting for
details.
②
Enable the intelligence detection (object detection, exception, line crossing or intrusion
detection) and draw alert surface or warning area of each IP camera. See 9.3 Intelligence Alarm
for details.
The camera will start intelligence recording once you finish the above settings. This function is
only available for some IPCs.