Troubleshooting
The display displays only black screen.
•
Check that all AC and DC plugs and jacks used by external power
supplies (both Opticis and others) are firmly connected.
•
Ensure that power bars are live.
•
Ensure that the Tx and Rx boxes plug correctly to the media receiver
or computer and display, respectively.
•
Check if the media receiver or computer and display are powered on
and properly booted.
•
Re-boot up the system after reconnecting the optical system cable.
Screen is distorted or displays noises.
•
Check if the graphic resolution is properly set. Go to the display
properties and tap the settings. Ensure that the resolution sets less
than SXGA (1,600x1,200) at 60Hz refresh ratio.
•
Reset the system.
•
Power down, disconnect and reconnect the optical system cable or
DC power adaptors, and power up.
Maintenance
No special maintenance is required for the optical system cables and power
supplies. Ensure that the cables and power modules are stored or used in a
benign environment free from liquid or dirt contamination.
There are no user serviceable parts. Refer all service and repair issues to
Opticis or its authorized distributor.
Technical Support and Service
For commercial or general product support, contact your reseller. For
technical service, contact Opticis by email
or visit its
website at
www.opticis.com
.
1-5 Troubleshooting, Maintenance, Technical Support
System Requirements for Setup
Hardware requirements
You have a Media Receiver or a graphic controller card with a
DVI (Digital Visual Interface) port in your Windows/Mac (Mac is
option), or SUN system. It should support the maximum graphic
resolution feature of the display to be connected.
In case of using a computer, no special memory size, CPU
speed and chipsets are required.
Proper initial trial of the entire platform with its application using
a short length copper cable is recommended prior to install with
the optical link.
Software requirements
No special needs, if the DVI graphic controller and display
peripheral are operational with the platform’s OS and
application.
AC/DC Power Adapter Technical Advisory
The power of M1-2Rx-TR is designed to supply to both modules of
Tx and Rx over the DDC cable by plugging the power jack to either
of their power plugs.
1-2 System Requirements for Setup
