Installation
Important: Please follow the installation procedure below. Improper or
no operation may result if the start-up sequence is not correctly
followed.
Step 1
Carefully unpack the contents in the shipping group.
Step 2
Please make sure HDFX-100-TR switch such as
‘Figure 2’. In normal
operation, Power and Status LED are on. If Source device have HDCP
capacity, both Transmitter and Receiver HDCP LED will be turned on.
Figure 2 - 1:1 (Point to point) Master Switch Setting
If you use 1: N Optical distributor, please changes Receiver
’s switch setting
such as
‘Figure 3’.
Figure 3 - 1: N (Use Optical distributor) Slave Switch Setting
When you using 1: N slave system, at least one master receiver must be
required.
1-3 Installation
Step 3
Connect the Transmitter to the HDMI sources (DVD, media receiver) over
HDMI cable.
Figure 4
– Connection of HDMI cable between Transmitter box and media receiver
Step 4
Connect the Receiver to the HDMI display over HDMI cable.
Figure 5
– Connection of HDMI cable between Receiver box and display
1-4 Installation (continued)
Audio/Display
Output
