opticis DVI/USB/RS-232 and Audio Optical Extender, Руководство пользователя

Страница: 6 / 7

Troubleshooting
The display shows only black screen.

Check that all AC and DC plugs and jacks used by external power
supplies (both Opticis and others) are firmly connected.

Ensure that power LED lit ON.

Ensure that the Transmitter and Receiver modules connected
correctly to the PC and display, respectively.

Check if the PC and display are powered on and properly booted.

Reset the M5-1003 using Reset button on Uplink and Downlink
modules.

Re-boot up the system after reconnecting the LC optical fibers.
Screen is distorted or displays noises.

Check if the graphic resolution is properly set. Go to the display
properties and tap the settings.

Reset the M5-1003 using Reset button on Transmitter and Receiver
modules.

Reset the system.

Power down, disconnect and reconnect the LC optical fiber or DC
power adaptors, and power up.
Maintenance
No special maintenance is required for this product. Ensure that this product
is stored or used in a benign environment free from liquid or dirt
contamination.
There are no user serviceable parts. Refer all service and repair issues to
Opticis or its authorized distributor.
Technical Support and Service
For commercial or general product support, contact your reseller. For
technical service, contact Opticis by email
techsupp@opticis.com or visit its
website at www.opticis.com .
1-8 Troubleshooting, Maintenance, Technical Support
Product Specifications
M5-1003 Optical KVM Extender
 Compliance with DVI standard: supports DVI 1.0 of DDWG, using
fiber-optic communication links and DDC2B.
 Compliance with USB 1.1 standard
 Extension limit:
2km (6,560feet) for WUGA (1920x1200) 24bit color at 60Hz
refresh rate.
 Audio: 3.5mm analog stereo audio

RS-232: D-sub 9 Pin
 Fiber-optic Connection: The transmitter and receiver boxes of M5-
1003 have two (2) duplex LC receptacles connected to two (2)
duplex Single Mode or Multi Mode optical patch cords.
 Mechanical specifications of Transmitter and Receiver boxes

Dimensions: 320 x 44 X 130mm (W/H/D)

Weight: 460

10.0 gram for each of Uplink and Downlink
module.
 Environmental Specifications

Operating temperature: 0°C to 50°C

Storage temperature: - 10°C to 85°C

Humidity: 5% to 85%
AC/DC Power Adapter
 Power Input: Universal AC 85-264V, 50/60Hz, AC power cord with
power jack.
 Power Output: +12 V, 3.0 A SMPS DC-power Adapter
 Cord DC Jack & length: Core is 12 V and outer cylinder is GND.
Length is 18.5 cm
 AC Cord length: 1.8m

Certification
:
PSE, UL, cUL, FCC, CE, TUV-GS
1-9 Product Specifications