Optical Systems OSD840 SERIES, Руководство оператора

Страница: 18 / 24

OPTICAL SYSTEMS DESIGN
DOC ID: 10104804.doc
OSD840 OPERATOR MANUAL
PAGE 16
2.3.5 ETHERNET CONNECTION
The OSD840 also includes a 10/100 Base-T Ethernet connection via the RJ45 connector. Figure 7
shows the pin-out configuration for the RJ45 connector located on the rear of the OSD840 unit (see
Figure 4). The green LED indicates that an Ethernet link has been established. The amber LED
indicates the link speed. If the LED is not illuminated, the link speed is 10Mbps. If the amber LED is
illuminated, the link speed is 100Mbps.
FIGURE 7: 10/100 BASE-T ETHERNET RJ45 CONNECTION
2.3.6 OSD840T AND OSD840R INDICATORS
The LED indicators are located on the front of the OSD840 unit (see Figure 5). Figure 8 shows the
LED orientation, while Table 7 describes the function of each LED indicator.
FIGURE 8: OSD840T AND OSD840R LED INDICATORS
DI3
DI2
DI1
LINK/VPI
DO3
DO2
DO1
LASER
AO2
AI2
AO1
AI1
8 7 6 5 4 3 2 1
1: Tx+
2: Tx-
3: Rx+
4: +2.5V out
5: +2.5V out
6: Rx-
7: Ground
8: Ground
Green LED:
LINK
Amber LED:
SPEED
Amber Green