18
Individual Parts / Parts Inspection
Setting up Windows Software for External Inputs
Under the Setup menu, select “Setup” and “Automation Type”. Select “Parts Inspection” so that the
software can be used to perform automated measurements on individual parts.
Automatic Parameters for Automatic Start, Stop and Save Options
Under the Setup Module, select Open, and open the setup file named “automatic.stp” to modify and use.
Next select the “Automatic” button and select “Automatic” for the Start and Stop options. Select “External”
for Save Options. The name of the data file can also be generated and printed automatically or manually
each time a new data file is saved. For details of doing this refer to the Lasercheck Windows Software
Manual.
Optionally data files can be saved automatically at time intervals or after a set number of parts. The name of
the data file can also be generated automatically and printed automatically each time a new data file is
saved. For details of doing this refer to the Lasercheck Windows Software Manual.
