6
2. Camera
Cabling
Please follow the instructions below to complete P218Z HD Speed Dome
Network Camera connection.
2.1 Connect
Power
Please refer to the illustrations below to connect power core through the
supplied power adaptor. The camera can be powered by Power Over Ethernet
Plus / PoE+ (802.3.at) or AC 24V. However, AC 24V power is required to
power the Camera heater.
2.2
Connect Ethernet Cable
Use of Category 5 Ethernet cable is recommended for network connection; to
have best transmission quality, cable length shall not exceed 100 meters.
Connect one end of the Ethernet cable to the RJ-45 connector of the Network
Speed Dome Camera, and the other end of the cable to the network switch or
PC.
NOTE:
In some cases, Ethernet Crossover Cable might be needed
when connecting the Network Speed Dome Camera directly to the PC.
Check the status of the link indicator and activity indicator LEDs. If the LEDs are
unlit, please check LAN connection.
Green Link Light indicates good network connection.
Orange Activity Light flashes for network activity indication.
Pin
Definition
1
AC 24_1
2
FG
3
AC 24_2