R Series Unpacking Guide
Page 10
Install the Pedals
Next install the pedals taking into account they are left and right specific. They are normally marked L R
and the left one is reversed thread. Apply a little grease to the threads before threading them in.Make
sure to use a proper pedal wrench on these.
Install the Rear Fender
Install the rear fender using a 4mm Allen wrench. Pay attention not to cross thread the threads on the
bolts when inserting into frame. Adjust the straightness of the fender before final tightening.
Check the Tire Pressure
Double check the tires are pumped up to the recommended pressure on the sidewall. A good starting
pressure is 35 psi in both tires. The pressure can be adjusted higher or lower depending on the terrain
you are riding on.
The R series use Presta style inner tubes that require a special bicycle pump, available at bicycle dealers.
