R Series Unpacking Guide
Page 9
Align Handlebar Stem with Front Wheel
At this point you can straddle the bike and line up the stem/bars with the front wheel (this is done purely
by “eyeballing” it) then tighten the stem bolts.
Attention: Be sure to cross tighten the stem bolts to insure they are tight.
Inflate the Front Fork
The front suspension fork is deflated for shipping so it will need to be pumped up
Start by unscrewing the cap over the air valve
Then thread the shock pump into the fork
Pump the fork to half the riders weight in psi, this pressure can be varied to suit your preferences (please
consult your Fox Shock manual for further details) Then replace the cap.
