Optex Water It TC-3000-DI, Инструкция по эксплуатации

Страница: 23 / 36

Adjustment
23
Select [Offset Adjustment] using
, and press .
Enter the offset value.
Select a digit by and
value by , and press .
During adjustment a progress bar is
displayed.
When completed, the display returns
to the measurement value display.
When a value outside the set range is entered, a short beep sounds.
Pressing
simultaneously while entering a value resets the
value to the factory default setting.
By pressing or , the value returns to the one before changing it.
3
4
$GMXVW
㸰 7XUE7&'
2IIVHW$GMXVWPHQW)78
6SDQ$GMXVWPHQW
3RLQW$GMXVWPHQW
,QLWLDOL]H$GMXVWPHQW9DOXH
$GMXVW
㸰 7XUE7&'
2IIVHW$GMXVWPHQW
ࠉࠉࠉࠉࠉࠉࠉࠉࠉࠉࠉ)78
$GMXVW
㸰 7XUE7&'
2IIVHW$GMXVWPHQW
Span adjustment
Set the span coefficient for a measurement value.
Display the measurement value with
span-adjusted to any display value.
For 4-20 mA output (“6 4-20 mA Setting” P.15)
and alarm output (“Alarm output setting” P.17),
the adjusted values are applied. Display value
after span
adjustment
Measurement
value