82
Error codes
Error code
and details
Cause
Action
E1000
Communications
error
The sensor cable is broken. Make sure that the cable is not damaged.
If any damage is found, contact the dealer.
The sensor cable is not
properly wired.
Turn off power, check the wiring, and be sure to
wire properly.
The sensor is out of order.
The sensor must be repaired. Contact the
dealer.
E2000
Sensor pro-
cessing/sensor
failure
SC-U1 was operated while
the sensor was being
processed.
The sensor is no longer accepting input
from the SC-U1. The display returns to the
measurement value after a few seconds.
The sensor cable is broken. Make sure that the cable is not damaged.
If any damage is found, contact the dealer.
The sensor cable is not
properly wired.
Turn off power, check the wiring, and be sure to
wire properly.
The sensor is out of order.
The sensor must be repaired. Contact the
dealer.
E3000 to E3999
Sensor failure
Follow “Troubleshooting” in the sensor’s instruction manual.
E4000 to 4999
Calibration error
Follow “Troubleshooting” in the sensor’s instruction manual.
M5xx Sensor
maintenance
Refer to “M5xx error code list” P.83.
E6200 to 6999
Transmitter
error
The ambient temperature
exceeds the operating
temperature of the
transmitter.
The ambient usage temperature must be -20 to
50°C.
E6400 to 6499
Transmitter
error
There is something wrong
with the transmitter.
Press and hold
for 5 seconds to display
the initialization menu. Perform initialization.
The transmitter is out of
order.
If the initialization menu does not appear
after pressing and holding
for 5 seconds,
or if the error persists after initialization, the
transmitter needs to be repaired, contact the
dealer.
The types of error codes as well as causes and countermeasures are described below.
In the case of that the error code is still displayed after countermeasures are taken, record the
error code as well as model and serial No. affixed inside the battery cover, and contact the dealer.
u
Error code list
