10
How to Use
(1) Confirm the wirings and then turn the power on.
The display flashes and then temperature measurement
starts (Normal Operation).
(2) Confirm that the measurement value changes when you put
your hand into the field of view.
* Leave the Unit for a while after the sensor head is mounted.
Temperature change may cause incorrect measurement.
25
E1.00
MODE
8888
Normal Operation
Press 3 sec. or more
Setting Operation
* Make sure to perform Save Settings.
If you cancel in Save Settings, all settings entered are not saved.
8.8.8.8
8.8.8.8
(3) To confirm or change the settings press the ENTER button
for three seconds or more.
The display flashes and then Setting Operation starts.
(4) Select the function with ▲/▼ buttons.
ENT.
END
SET
Save Settings
BANK
1
➊
Bank Setting
DELY
1
➋
Response
Time Setting
TADJ
E1.00
➌
Adjustment
Setting
ASCL
-40
➍
Analog Output
Setting
ALAM
400
➎
Alarm Output
Setting
TRIG
NoN
➏
Trigger Input
Setting
ECO
OFF
➐
Display Off
Setting
▲ button
:
▼ button
:
