- 37 -
Using the internal web pages
Video impedance
Resistance to the flow of signal current.
- 75 Ohm
To be selected with one video source on one video input.
-
Hi-Z
With a number of video inputs in parallel using one video
source, use the Hi-Z setting on all inputs except the last.
Show Preview>>
Click to view live images from the video input.
Encoder
Drop-down list displayed after clicking the Show Preview>> button.
Enables you to select a video encoder to handle the images seen in
the previews on this tab and the Live Video page (Maximized mode).
Live View, Encoder 1,
or
Encoder 2.
A selection you make here, applies to all four Video Inputs.
<< Hide Preview
Hiding the preview may improve web page responsiveness.
Contrast/Brightness
/Colour saturation
/Hue/Sharpness
Drag the sliding button, or enter values into the boxes, to adjust
current settings, aided by the visual feedback from the preview.
Settings entered here apply to all video encoders of the selected
video input.
Default
Restores the original values.
Encoder priorities
Each selectable priority can be assigned only once. An encoder with High priority (1) will
consume all CPU power it needs, leaving the remainder, if any, to the next in line. The
encoder with priority Medium priority (2) will show the same behavior, possibly leaving little
or no CPU power to the Low priority (3) encoder.
important
To prevent Live View encoding (if used) from having the lowest priority, the
highest priority is best assigned to the Live View Encoder, since this is a
relatively light task compared to the encoding tasks of Encoder 1 and
Encoder 2.
