Optelec ClearReader+, Руководство пользователя

Страница: 29 / 264

Optelec ClearReader
+
English 28
Turning on the ClearReader
+
To turn on the ClearReader
+
, press the round Power button on the right-hand
side. The start-up process will take approximately 40 seconds. You will hear a
series of beeps to indicate that the ClearReader
+
is starting up followed by the
start-up sound. Now the Power indicator is lit up and the ClearReader
+
is ready
to use.
Standby mode
The ClearReader
+
will go into standby mode by pressing, and holding down the Back button and
Forward button for 2 seconds. The standby sound will be played, the Power indicator will start
blinking and the ClearReader
+
will go into standby mode. To wake up the ClearReader
+
from
standby, press the Power button. When the batteries are fully charged, the standby time of the
ClearReader
+
is approximately 40 hours. After 40 hours the ClearReader
+
will power down. If
switching-on the ClearReader
+
from the standby mode, the start-up process will take
approximately 10 seconds.
Turning off the ClearReader
+
Press the Power button to power down the ClearReader
+
completely. The power down sound will
be played and the Power indicator will turn off.