3. Place neo2, connect antenna & power!
•
Place neo2 in your equipment
•
Route antenna leads to neo2
•
Connect both antenna leads to neo2 and fully tighten
•
Route power adapter’s cord from power source to neo2
•
Connect power cord to neo2 — ensure the green LED
next to the power port glows
•
After 10 - 60 seconds, ensure the amber Cellular
Activity LED glows or flashes
IMPORTANT
— when neo2 powers on the first time it
may download a software update. This is indicated by a
rapidly flashing amber Cellular Activity LED for 1 - 2
minutes and may be followed by the LED going dark
while neo2 reboots.
You must allow this process to
complete
.
