Stainless steel cable(safety rope)
PROPER USAGE
This product is for overhead mounting only. For safety purposes, this projector should be mounted on
steady elevated platforms or sturdy overhead supports using suitable hanging clamps. In all cases, you must
use safety cables.
International laser safety regulations require that laser products must be operated in the fashion illustrated
below, with a minimum of 3 meters (9.8 ft.) of vertical separation between the floor and the lowest laser
light vertically. Additionally, 2.5 meters of horizontal separation is required between laser light and
audience or other public spaces.
The audience area can be passively protected by sliding the aperture cover plate upwards and fixing it in
proper position by the two thumb screws.
RIGGING
3 meters
laser beams
Be sure that the structure onto which you are mounting this product can support its weight.
Mount the product securely. You can do this with a screw, a nut, and a bolt. You may also use a mounting clamp if
rigging this product onto a truss. The U-shaped support bracket has three mounting holes which may be used to
secure the clamps to the projector.
Always consider ease of access to the unit before deciding on a location for this product
When mounting this product overhead, always use a safety cable.
7
