1
2
3
4
5
6
7
8
9
10
11
12
13
14
1
Laser aperture
(covered by masking plate)
DO NOT look directly into this aperture once the masking plate gets loosen
When this indicator is lit up the laser system is ready to emit the laser
radiation as soon as it receives instructions from control software.
Laser Emission
LCD Display
2
3
4
5
6
7
8
9
10
11
12
13
14
Integrated with multi settings on the projector, please refer to detailed
settings (on Page 11. ) for the LCD
ILDA Input & Output
DMX Input & Output
PowerCON Input & Output
MicroPhone
INTERLOCK (RJ45 jack)
Power Switch
FUSE
Keyhole
Menu knob for LCD Setting
SD-Card Slot
Safety Ring
DB25 connections input and output for ILDA mode display
3-pin DMX connections input and thru for DMX512 mode display
Power connections input and output
Sound receiver
Laser output is available only when the interlock is connected.
It could be used to connect a laser emergency switch(E-stop box).
Power On/Off
Safety element; current rating 4amps
Key Switch, laser output is available when the key is moved to position “on”
The knob for the main settings on LCD, click it to wake the LCD and rotate
it for corresponding status setting
Slot for SD-Card which you may have your own laser files to export on
The ring for enwinding a safety rope when the laser device will be installed
on out-of-reach locations.
INTRODUCTIONS
of
PD3 SERIES
13
