Opt Lasers PLH3D-6W-XF, Руководство пользователя

Страница: 24 / 27

Support and Manuals
24 / 27
CONTROL Connector Pinout with Description
Pin no. Name Description
1 ANGIN 5V INPUT A proportional (analogue) modulation input, operating in a
0-5 V range (corresponds to 0% - 100% levels respectively).
The input withstands voltages up to 24 V DC. The input
impedance is 3.9 kΩ.
2 TTL/PWM INPUT A digital modulation input that accepts PWM and TTL
signals. The voltage range of 0-0.8 V corresponds to “off”
while the voltage range of 2-24 V corresponds to “on”.
Compatible logic control signals are: 0/3.3V, 0/5V, 0/10V and
0/24V. The input impedance is 10 kΩ.
3 ENABLE1 INPUT A digital input that enables/disables laser controlling. The
input accepts digital signals where 0-0.8 V corresponds to
LOW while 3-24 V corresponds to HIGH. The input
impedance is approx. 35 kΩ.
4 GROUND Ground signal.
5 ENABLE2 INPUT A digital input that enables/disables laser controlling. The
input accepts digital signals where 0-0.8 V corresponds to
LOW and 3-24 V corresponds to HIGH. The input impedance
is approx. 35 kΩ.
6 ANGIN 10V INPUT A proportional (analogue) modulation input, operating in a
0-10 V range (corresponds to 0% - 100% levels respectively).
The input withstands voltages up to 24 V DC. The input
impedance is 7.8 kΩ.
7 INVERTED TTL/PWM
INPUT It is an inverted digital modulation input that accepts PWM
and TTL signals. The voltage range of 0-0.8 V corresponds to
“on” and the voltage range of 2-24 V corresponds to “off”.
Compatible logic control signals are: 0/3.3V, 0/5V, 0/10V and
0/24V. The input impedance is 10 kΩ.
8 ARMED OUTPUT An open-drain output. It is connected to GROUND when the
laser is disarmed, and open (high-impedance) when the
laser is armed. May be used as an active-low error signal to
the controller. The maximum current is 100 mA and the
maximum voltage is 40 V DC.