22
Safety Precautions
• Clean the equipment with a soft dry cloth (e.g. wiping cloth for
eyeglasses). Rubbing with a dry cloth etc. forcibly may scratch the
display. The display may get stained if splash or soil is left on the
surface. Also, wiping with alcohol, thinner, benzene, detergent,
glass cleaner, etc. may erase the printing on the exterior case or
cause a malfunction.
• Use as far away as possible from land-line phones, TVs and
radios. Use of the product nearby may affect them.
• The product may become warm while charging etc. depending on
your use condition, but this is not abnormal.
• Do not put near corrosive chemicals or in a place where corrosive
gas is generated. May cause a malfunction.
• Do not use outside when you hear thunder. May risk lightning
strikes and electric shock.
• Always use the specified peripheral equipment. Use of other
peripheral equipment may cause a malfunction.
• Do not put the product in a cooking apparatus such as microwave
oven or a pressure vessel. May cause a malfunction.
• The customer is not allowed to disassemble, modify or repair the
product. May cause a malfunction. Modification of the product is a
violation of the Radio Law and Telecommunications Business Act.
• Do not allow a part of your body such as finger or conductive
foreign objects (metal fragments, pencil leads, etc.) to come into
contact with or enter to the external connection jack or earphone
jack. May cause a malfunction.
• In the event that the product gets wet while charging, disconnect a
power plug of the specified charging equipment (sold separately).
• Do not use the product while driving a car or motorized bicycle,
riding a bicycle or walking. Use of mobile phones while driving a
car or motorbike is prohibited by law. Use of a mobile phone while
riding a bicycle may also be punishable by some regulations.
• Using or charging the product in a bag or when it is covered with
bedding may cause a malfunction.
• Always insert or remove a connector of the specified charging
equipment (sold separately) or external device straight against a
jack to connect. If it is inserted or removed in the wrong direction,
it may cause a malfunction.
• Do not expose the camera lens to direct sunlight for a long time.
May cause a malfunction.
• Do not use, store or leave the product in a place where it is subject
to direct sunlight (e.g. inside a car), the temperature becomes
hot or extremely cold, or it is very humid or dusty. May cause a
malfunction.
• Do not place the equipment on unstable surfaces, such as on
a wobbly table or sloped surface. Be careful especially while
charging or when the vibrator is set. The product may fall and
cause a malfunction etc.
