31
Press [DVD MENU]on remote control more than 3 seconds to auto scan.
Press [SETUP] button to enter setup menu, then choose the DVB item;
Using the [ ] button to select the Auto Scan item, and press [OK] or [ ] button
to select Start item, then press [OK] button.
A prompting message will be displayed to request that you confirm, select OK and
press the [OK] button to confirm.
"
"
In the scan process, the scan result will be displayed
in the Auto Scan window.
DVB FUNCTION SETUP
Note:
If you press the [SETUP] button during scanning, the operation is stopped and a prompting
message will be displayed at the bottom of Auto Scan window. Select OK and press [OK]
button to abort Auto Scan operation, and the channels found until then will be saved. And
select Cancel and press [OK] button to return to Auto Scan process. Wait while the TV
searches for the channels, this may take a few minutes.
"
"
"
"
Once you press [OK] button to start auto search operation, all the saved channels will be
cleared.
You can scan channels manually by setting scan parameters.
1. In setup menu, select Manual Scan , a manual scan window will be shown as follows:
2. Enter the frequency you want to scan by the number
buttons, then press OK , the scan button seems be
pressed, press [OK] button again to scan, a scan
sign : scanning... will be shown on the window.
3. The scan result will be displayed on the right half
of the manual scan window, you can save the founded
channels or delete them.
"
"
"
"
Manual scan
40%
Auto Scan
Freq: 65000KHz
TV Total: 00
Radio Total: 00
Progress:
Status
Found Channels
Adjust channel
You can set your favorite channel, set parental control age for some channels or delete
channel in Adjust Channel window.
1.Select channel using [ ] button , Press [RED] button to set this channel as one of your
favorite channels.
Auto Scan
Connect the antenna to the RF socket on the TV, if the antenna needs a power supply,
please press [ANT. ON/OFF] button to turn on the
power for the antenna . Then you can automatically
search channels without entering any other
information.
Manual Scan
Freq: 177500KHz
Status
Found Channels
Scan
2. Select channel using [ ] button , if you don't like this channel press [GREEN] button
to delete it .
3. Select channel using [ ] button, press [YELLOW] button to set this channel as a
protected one, to prevent children from watching the undesired program in it.
Note:
If you set a channel protected, a password will need to be inputted in the Protect
Channel window.
The default a password is
000000
.
