2. Place the disc (with label side facing users) to the door and the unit will draw in the disc
automatically.
1. Power on and switch signal source to DVD mode and the unit begins to work.
3. Press [ ] button to begin playing disc.
4. Press [ ] button to stop playing.
6. When finishing playing, switch signal source to other working state or press [ ] button
to make the unit enter standby state. Please pull out the power plug from power socket
when not using the unit for a long time.
PLAYBACK
The unit begins to read disc information.
CD
VCD
SVCD
DVD
5. Press [ ] button to take out disc.
EJECT
STANDBY
PLAY
STOP
DVD OPERATION
17
When the unit playing a disc, press[ ] button the firs time and the unit enters pause state, press
[ ] button again and the unit goes to frame-by-frame playback. Press [ ] the third time to
resume to playback.
When the unit is playing a disc, press [ ] button the first time and the unit enters pre-stop state,
press [ ] button again and the unit enters stop state.
At the pre-stop state, if you press [ ] button, the unit will continue to play from the stopped point.
At the stop state, if you press [ ] button, the unit will play from the beginning point of the disc.
Press [ ] button when playing some discs and the unit enters stop state directly.
[ ] button is effective only when in DVD mode. In other signal source ,such as TV,AV, etc, this
button is invalid.
1. Press [VOL+/VOL-] buttons on the remote control of this unit.
Press [VOL+] button to increase volume; press [VOL-] button to decrease volume; the
maximum volume is 100.
CD
VCD
SVCD
DVD
VOLUME CONTROL
VOL
+
VOL
-
