S E T U P
M E N U
O P T I O N S
73
be heard. In this situation, it is necessary to reduce the
Trim Level
until the distortion is
removed. When using the
Trim Level
for speakers, it is recommended that you set the
least sensitive speaker’s
Trim Level
to 0dB, and set other speakers’
Trim Level
to
negative values.
x
The
Test Tone
can be used in conjunction with the player’s trim control. Each speaker
can be set to independent trim levels and there is no linked pair limitation.
Other Audio Processing Settings
In addition to
Speaker Configuration, Crossover Frequency
and
Dynamic Range Control
are audio
processing settings that can be configured:
1.
Crossover
: Allows you to set the Bass Management kick-in frequency for all speakers. When the
speaker size is set to
Small
in
Speaker Configuration
(see page 71), bass information below this
frequency is not passed to the speakers to reduce possible distortion, and if the subwoofer is
available, bass information will be redirected to the subwoofer. When all speaker sizes are set to
Large
, there is no Bass Management.
x
40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz
– These are
the available crossover frequencies. You can press the
UP/DOWN ARROW
buttons and the
ENTER
buttons to select it. This option applies to all speakers (center, front, surround, and
surround back speakers). By default the crossover frequency is
80Hz
.
2.
Dynamic Range Control
: Allows you to set the Dynamic Range Compression (DRC). DRC can
smooth out the sonic peaks and valleys common with wide-range digital audio. Enabling DRC may
make low level audio more audible during low-level listening. Turning off DRC restores the sonic
energy present in the original recording.
x
Auto
– Plays at the dynamic range specified by the disc. This option applies to certain Blu-
ray Discs only, which have DRC instructions encoded in the Dolby TrueHD audio tracks.
x
On
– Turn on DRC for all Dolby and DTS audio formats. This option applies to all DVD and
Blu-ray Discs.
x
Off
– Turn off DRC.
NOTE
3.
DTS Neo:6 Mode
: Allows you to enable DTS Neo:6 audio processing and select the listening mode.
It is a digital signal processing that can expand the original stereo source to 7.0 (L, R, C, L
S
, R
S
, L
R
,
R
R
) or 7.1 (with Bass Management) surround.
x
Music
– Enables DTS Neo:6 audio processing for stereo music sources.
x
Cinema
– Enables DTS Neo:6 audio processing for digital TV box or stereo movie sources.
x
Off
(default) – Turns off the DTS Neo:6 to keep the original audio quality.
4.
Output Volume
: Allows you to enable or disable the analog volume controls (also known as Variable
Audio). The available options are:
Dynamic Range Control
is applied to the analog audio outputs (stereo and multi-channel),
as well as the digital audio outputs (HDMI, Coaxial and Optical) when the audio format is set
to
PCM.
Содержание BDP-105
Страница 1: ...USER MANUAL READ CAREFULLY BEFORE OPERATION Blu ray Disc Player BDP 105 ...
Страница 95: ...51976808 V1 6 ...
Страница 96: ...www oppodigital com ...
