3
E115752#1
2
2
3
7
7
8
5
10
9
9
10
c
d
9
20
20
20
30
145
170
200
7. Glue the two wooden strips (2) to the face sides of the
wooden strip (3) as shown and fix each strip with a screw
(7).
Note:
The blind holes must face inwards!
8. Place a wooden wheel (5) between the wooden strip (2)
and the frame on both sides. Put a cylinder head screw (8)
with a washer (9) in the hole of each strip as shown so that
the screw heads are in the blind holes of the strips (2).
9. Place a washer on both screws (8) and then screw a wing
nut (10).
Note
:
Before you put the frames together you should colour
the holder..
10. Cut the attached sponge rubber plate (6) according to
the drawing.
11. Glue the sponge rubber cut (c) centric to the front edge
of the frame as shown and let the glue dry well.
12. Glue the sponge rubber cut (d) to the frame (3) as shown.
blind hole ø 8mm
6
a
b
c
d
