WRO-100
Wireless Router
18
OPHIT CO., LTD.
5. WDS
WRO-100 WDS Setting
Set IP as 10.10.10.xxx on connecting device (setting IP of the device in the same network area but
different IP with WRO-100 for connection) and open Internet Explorer.
After getting connected to WRO-100 AP on wireless, type 10.10.10.254 on explorer and then press enter
to be connected on setting page. (User name/Password:
admin
/
admin
)
Go to Wireless Distribution System Setting page by clicking WDS on Menu
-
Default value is set as “Disable”. Select “Bridge Mode”, “Repeater Mode” for Main AP and “Lazy
Mode”, “Repeater Mode” for Slave AP.
-
Wi-
Fi can’t be searched from device when set on “Bridge Mode” because Wireless works through
WAN port. Please check your settings before applying because device has to be connected by
cable to be connected.
-
Repeater Mode is a mode using AP and Bridge simultaneously. MAC address of AP needs to be
inputted when setting Bridge Mode and Repeater Mode. MAC address can be found on Local
Network box of Status page.
