ET 200X(L) Series Digital Gateway User Manual
46/78
Account Code
You may specify a default account for Call Detail Records (CDRs) in addition
specifying on a per-user basis.
Table 4-4-2 Instruction of Music on Hold
Options
Definition
Mohsuggest
The ‘Mohsuggest’ option specifies which music on hold class to suggest to the peer
channel when this channel place the peer on hold. It may be specified globally or on a
per-user or per-peer basis.
Mohinterpret
You may specify a global default language for users. This can be specified also on a
per-user basis. If omitted, will fall back to English(en)
Table 4-4-3 Instruction of Codec Settings
Options
Definition
Band Width
Specify bandwith of low, medium, or high to control which codes are used in general
Disallow
Fine tune codes here using “allow” and “disallow” clause with specific codes
Allow
Fine tune codes here using “allow” and “disallow” clause with specific codes
Codec Priority
Codec priority controls the codec negotiation of an inbound IAX2 call. This option is
inherited to all user entity separately which will override the setting in general.
Table 4-4-4 Instruction of Jitter Buffer
Options
Definition
Jitter Buffer
Global default as to whether you want the jitter buffer at all
Force Jitter Buffer
In the ideal world, when we bridge VoIP channels we don’t want to jitter buffering on
the switch, since the endpoints can each handle this. However, some endpoints may
have poor jitter buffers themselves, so this option will force to always jitter buffer, even
in this case.
Max Jitter Buffers
A maximum size for the jitter buffer
Resyncthreshold
When the jitter buffer notice a significant change in delay that continue over a few
frames, it will resync, assuming that the change in delay was caused by a
timestamping mix-up. The threshold for noticing a change in delay is measured as
