DGW-L20X User Manual
OPENVOX
58
prevents interpolating throughout a long silence.
Jitter Target
Extra
Number of milliseconds by which the new jitter buffer will pad its size. The default is
40, so without modification, the new jitter buffer will set its size to the jitter value may
help if your network normally has low jitter, but occasionally has spikes.
Table 4-4-5 Instruction of Misc Settings
Options
Definition
IAX Thread Count
Establishes the number of iax helper thread to handle I/O.
IAX Max Thread
Count
Establishes the number of extra dynamic threads that may by spawned to
handle I/O.
Max Call Number
The ‘maxcallnumbers’ option limits the amount of call numbers allowed for
each individual remote IP address. Once an IP address reaches its call
number limit, no more new connections are allowed until the previous ones
close. This option can be used in a peer definition as well, but only takes effect
for the IP of a dynamic peer after it completes registration.
MaxCallNumbers_
Nonvalidated
The ‘maxcallnumbers-nonvalidated’ is used to set the combined number of call
numbers that can be allocated for connections where call token validation has
been disabled. Unlike the ‘maxcallnumbers’ option, this limit is not separate for
each individual IP address. Any connection resulting in a non-call token
validated call number being allocated contributes to this limit. For use cases,
see the call should be sufficient in most cases.
