DGW-L20X User Manual
OPENVOX
75
and configurations for E1 gateways in mass deployment. With auto provisioning, all user
information can be entered via the central ACS (Auto Configuration Server). ACS can be DHCP
server or TFTP, HTTP and FTP server. It will not take effects immediately but in the next time
system is power on. It could be postponed the execution of restart system also.
Note that system will not be upgrade the firmware and update configurations if the connection
between ACS and gateway is disconnect.
7.4.1 Preparation
The following should be prepared before auto provisioning being applied.
⚫
Enable the auto provisioning in gateway
⚫
The ACS has been prepared
⚫
The network between gateway and ACS is connected
7.4.2 Configuring gateway
Usually, the feature is disabled before being on sale. To activate the auto provisioning function,
please follow the procedures as below.
Step 1
On the
ADVANCED
-
>
Auto Provision interface
Step 2
Enable the ‘Enabled’ option and select ACS. DHCP option 66 can be enabled if ACS has
been working as DHCP server, otherwise please select protocol of provisioning and fill the value of
‘
Auto Config Server URL
’. Username and password may need to be filled in FTP/HTTP for the
purpose of system safety. Do not forget to select Firmware upgrade, upgrade mode and fill the
value of timeout, and click ‘
Save’
.
Step 3
Set interval of checking in
LOGS
-
>
System notice
then enable it, and click ‘
Save’
.